Journal of Applied Physics · 2014 · 10 citations · 17 references
EngineeringMechanical EngineeringHeat TransferInternal Combustion EnginesMechanical DesignEngine DesignEngine EfficiencyEngine ModelingEngine PerformanceEngine Performance CharacteristicsFour-stroke EnginesEngine Performance AnalysisEngine Performance SimulationEngine SimulationFour-stroke Engine DesignHeat LossIndicated Thermal EfficiencyPower OutputThermal Efficiency
In order to mitigate frictional and leakage losses in small scale engines, a compliant engine design is proposed in which the piston in cylinder arrangement is replaced by a flexible cavity. A physics-based nonlinear lumped-parameter model is derived to predict the performance of a prototype engine. The model showed that the engine performance depends on input parameters, such as heat input, heat loss, and load on the engine. A sample simulation for a reference engine with octane fuel/air ratio of 0.043 resulted in an indicated thermal efficiency of 41.2%. For a fixed fuel/air ratio, higher output power is obtained for smaller loads and vice-versa. The heat loss from the engine and the work done on the engine during the intake stroke are found to decrease the indicated thermal efficiency. The ratio of friction work to indicated work in the prototype engine is about 8%, which is smaller in comparison to the traditional reciprocating engines.
17
Derek Dunn‐Rankin, Elisângela Martins Leal, David C. Walther · Progress in Energy and Combustion Science · 2005 · 254 citations
Motion characteristic of a free piston linear engine
Xiao Jin, Qingfeng Li, Zhen Huang · Applied Energy · 2009 · 122 citations