Evaluation of a new composite prosthesis (PL‐PU99) for the repair of abdominal wall defects in terms of behavior at the peritoneal interface

Abstract

This study was designed to evaluate the behavior of a new composite polypropylene-polyurethane (PL-PU99) when placed in direct contact with the visceral peritoneum during the repair of an abdominal wall defect. Full-thickness abdominal wall defects (7 x 5 cm) were created in 36 anaesthetized white New Zealand rabbits. The defects were repaired with polypropylene prostheses or PL-PU99 prostheses (comprised of PL and a polyurethane sheet glued to the PL with acrylic adhesive) to establish two study groups (n = 18 each). Animals were sacrified 14, 30, or 90 days after implantation and prosthesis/surrounding tissue specimens were subjected to light and electron microscopy and morphometric analysis of the newly formed peritoneum. Immunohistochemical analysis was performed using the rabbit specific monoclonal antibody RAM-11. The biomechanical strength of the implants was also assessed. Firm adhesions were detected in the PL implants, whereas adhesions were practically non-existent in the PL-PU99 implants. The surface area covered by adhesions was greater (p < 0.01) in the PL group (7.36 vs. 0.11 cm2). The neoperitoneum formed after the implantation of a PL prosthesis was disorganized in structure, whereas that formed at the interface with the PL-PU99 prosthesis was structurally similar to the host peritoneum. The excellent performance of the PL-PU99 prosthesis shown in this study warrants further investigation into its use for the repair of abdominal wall defects when the prosthetic patch needs to be placed in contact with the intestinal loops.