AIChE Journal · 1978 · 213 citations · 18 references
EngineeringChemical EngineeringCombustionProcess ControlReaction EngineeringEnergy ConversionHeat Transfer In ReactorsReactor DesignReactor DynamicsReactor KineticsReactor ModelingCritical TemperatureGasificationReactor Performance Optimization
The combustion zone in moving‑bed coal gasifiers is defined by the maximum temperature, and efficient operation requires a critical feed‑gas temperature to avoid insufficient gasification and excessive carbon loss. A steady‑state model of moving‑bed coal gasifiers was developed and validated against commercial and pilot plant data, showing that reactor performance depends on operating variables and that maximum efficiency is governed by the coal‑to‑oxygen feed ratio.
Abstract A steady state model of moving‐bed coal gasification reactors has been developed. Model predictions are in agreement with published commercial plant data for Lurgi pressurized gasification reactors and a pilot plant slagging gasifier. The dependence of reactor performance on operating variables has been studied for Illinois and Wyoming coals. For a given coal, maximum efficiency is determined by the coal‐to‐oxygen feed ratio. The location of the maximum temperature, which defines the combustion zone, is an important operating variable. Efficient operation of the dry ash reactor cannot be carried out below a critical feed gas temperature because of insufficient gasification and excessive carbon loss in the ash.
18
C. J. Tranter · Journal of the Mechanics and Physics of Solids · 1959 · 18.5K citations
Octave Levenspiel · Industrial & Engineering Chemistry Research · 1999 · 10K citations
D. Geldart · Powder Technology · 1969 · 1.3K citations
Studies on effective thermal conductivities in packed beds
Sakae Yagi, Daizō Kunii · AIChE Journal · 1957 · 738 citations
Engineering, Chemical Engineering, Materials Engineering +16
Coal devolatilization and hydrogastification
Donald Barrett Anthony, Jack B. Howard · AIChE Journal · 1976 · 685 citations