Hot Water Flooding for High Permeability Viscous Oil Fields

S. G. Goodyear, Charlie Reynolds, P. H. Townsley, C. L. Woods

SPE/DOE Improved Oil Recovery Symposium · 1996 · 19 citations · 2 references

Concepts

Abstract

Abstract A number of North Sea reservoirs contain viscous oils in high permeability sands. One possible IOR technique is the injection of hot water using long horizontal wells. A sector model for a high permeability reservoir containing a 400 cp oil underlain by a large aquifer has been constructed. Hot water injection was compared to cold water injection. Hot water flooding can recover significant volumes of incremental oil and extend the economic life of the field. The incremental recovery mechanism is a complex interaction between gravity forces and temperature induced changes in viscosity and density. Improved sweep in some regions is partly offset by oil resaturation of previously swept regions. Thermal expansion of water plays an important role, the lower density of hot water reduces thermal loses to the aquifer and speeds up the propagation of the temperature front through the reservoir. A risk management study is reported in which sensitivities to well bore friction, kv:kh ratio, heterogeneity and relative permeability are investigated. The optimal choice of the injection well position (different depths in the oil column from the top of the reservoir) is considered for cold and hot water flooding and is shown to be strongly determined by the kv:kh ratio. Significant friction in the horizontal producers and injectors can be detrimental to hot water flooding performance. A Monte Carlo analysis is performed to select the most appropriate well position. This also shows, for a reservoir of this type, that hot water has the potential to add value to a development scheme at acceptable levels of project risk.

References

2