Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering · 1994 · 37 citations · 3 references
EngineeringMaterials EngineeringMaterials ScienceFinite Element AnalysisMechanical Behavior Of MaterialsMetallurgyFracture MechanicsSolid Mechanics ApplicationsStress ConcentrationRivet Fatigue BehaviorRivet Joint Failure ModesRivet Joint Finite Element AnalysisRivet Joint ModelingRivet JointsStress Concentration AnalysisStress Concentration FactorsStress Patterns
Countersunk and snap riveted single lap joints have been examined both experimentally and numerically. A total of 11 specimens were fatigued to failure with failures occurring in either the plate or the rive***r. The failures have been metallurgically examined to determine the cause of failure. The joints have also been analysed using the finite element method. Initially a single lap joint has been modelled as a ‘stepped plate’ and the results for the stress concentration factor found to be in reasonable agreement with published data. However, the stress concentration for this joint occurred at a point away from the point of failure of a riveted joint. A fuller three-dimensional finite element model has been constructed and the stress patterns around the rivet determined. These stress patterns are discussed in relation to the results from the metallurgical examination.
3
The Stresses in Cemented Joints
Micaela Goland, E. Reissner · Journal of Applied Mechanics · 1944 · 1.6K citations
Fatigue of riveted connections
K. A. Baker, Geoffrey L. Kulak · Canadian Journal of Civil Engineering · 1985 · 28 citations