Application of Fischer–Tropsch Synthesis in Biomass to Liquid Conversion

Jin Hu, Fei Yu, Yongwu Lu

Catalysts · 2012 · 241 citations · 108 references

DOIFull text

Open access

Concepts

TL;DR

Fischer–Tropsch synthesis converts synthesis gas from natural gas, coal, or biomass into fuels and chemicals, and biomass‑to‑liquid via this process is increasingly pursued for carbon‑neutral clean fuels that can meet growing energy demand and stricter environmental regulations. This review examines the three main steps of BTL‑FT—biomass gasification, bio‑syngas cleaning, and Fischer–Tropsch conversion—to address challenges in each stage. The BTL‑FT process gasifies biomass into bio‑syngas, cleans it to meet synthesis requirements, and then feeds it to a Fischer–Tropsch catalytic reactor to produce green gasoline, diesel, and other biofuels while optimizing carbon utilization, catalyst activity, selectivity, and deactivation resistance.

Abstract

Fischer–Tropsch synthesis is a set of catalytic processes that can be used to produce fuels and chemicals from synthesis gas (mixture of CO and H2), which can be derived from natural gas, coal, or biomass. Biomass to Liquid via Fischer–Tropsch (BTL-FT) synthesis is gaining increasing interests from academia and industry because of its ability to produce carbon neutral and environmentally friendly clean fuels; such kinds of fuels can help to meet the globally increasing energy demand and to meet the stricter environmental regulations in the future. In the BTL-FT process, biomass, such as woodchips and straw stalk, is firstly converted into biomass-derived syngas (bio-syngas) by gasification. Then, a cleaning process is applied to remove impurities from the bio-syngas to produce clean bio-syngas which meets the Fischer–Tropsch synthesis requirements. Cleaned bio-syngas is then conducted into a Fischer–Tropsch catalytic reactor to produce green gasoline, diesel and other clean biofuels. This review will analyze the three main steps of BTL-FT process, and discuss the issues related to biomass gasification, bio-syngas cleaning methods and conversion of bio-syngas into liquid hydrocarbons via Fischer–Tropsch synthesis. Some features in regard to increasing carbon utilization, enhancing catalyst activity, maximizing selectivity and avoiding catalyst deactivation in bio-syngas conversion process are also discussed.

References

108