Journal of Applied Polymer Science · 2012 · 36 citations · 16 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryPolymer ChemistryThin FilmsCrystalline MaterialsOrganic SemiconductorsPolymer CrystallinityPolymer Thin FilmsSemiconductor Thin FilmsThin Film AnnealingCrystallization BehaviorCrystallization In Thin FilmsCrystallization MechanismsOptimum TemperaturePolythiopheneSilicon Thin FilmsTemperature Optimum
Abstract Low‐temperature casting of high molecular weight (HMW > 40 kDa) regioregular poly(3‐hexylthiophene) (P3HT) is demonstrated to yield highly crystalline P3HT thin films with well defined and preferentially edge‐on oriented [(100) contact plane] nanocrystallites on the pure and silanized Si/SiO 2 substrates. Transmission electron microscopy and X‐ray diffraction provide evidence for the increase in preferential edge‐on orientation of P3HT‐conjugated backbone while decreasing the film preparation temperature below room temperature. The optimum growth temperature is about −12°C for the given concentration (2 mg/mL in CHCl 3 ). The reduced evaporation rate of the solvent results in a better selection of the thermodynamically stable orientation of nanocrystallites onto the substrate. The degree of preferential orientation and size of the crystallites can be further increased on n ‐octadecyltrichlorosilane‐treated SiO 2 substrates as well as by annealing the films at 200°C for 1 h. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
16
Two-dimensional charge transport in self-organized, high-mobility conjugated polymers
Henning Sirringhaus, P. J. Brown, Richard H. Friend et al. · Nature · 1999 · 4.6K citations