Fullerenes Nanotubes and Carbon Nanostructures · 2007 · 14 citations · 9 references
EngineeringChemical EngineeringMaterials ScienceMaterials ChemistryNanomaterialsNanotechnologyCarbon NanomaterialsCarbon NanotubesFlame StructureFuel ChemistryLaminar FlamesNanotubesCarbon NanofibersCarbon Nanotube SynthesisCarbon-based NanomaterialsCarbon-based NanostructuresFuel Flow RateLaminar Diffusion FlamesMulti-walled Carbon NanotubesNanostructures
Abstract Flame synthesis of carbon nanostructures including nanotubes on galvanized steel was investigated utilizing laminar diffusion flames of different types of fuel. Methane (CH4), propane (C3H8) and acetylene (C2H2) were used as fuels. Distinctive carbon nanostructures were produced depending on fuel types and fuel flow rates. The qualitative and quantitative analysis of many transmission electron microscope (TEM) and scanning electron microscope (SEM) images were performed. Methane produced thin multi wall carbon nanotubes as well as nanorods and nanofibers within the fuel flow rate range of 7.18E‐07 m3/s to 9.57E‐07 m3/s. Propane yielded nanotubes only at the fuel flow rate of 4.20E‐07 m3/s. The nanotubes synthesized by acetylene flames were of different types that included helically coiled and twisted nanotubes.
9
Flame synthesis of single-walled carbon nanotubes
Murray Height, Jack B. Howard, Jefferson W. Tester et al. · Carbon · 2004 · 191 citations
Natural Sciences, Materials Engineering, Materials Science +10
Ethylene flame synthesis of well-aligned multi-walled carbon nanotubes
Liming Yuan, Kozo Saito, Wenchong Hu et al. · Chemical Physics Letters · 2001 · 163 citations
Natural Sciences, Materials Engineering, Materials Science +14