Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 1990 · 20 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMetallic MaterialsThin FilmsMetal MaterialsMetalsThin-film MaterialsX-ray CrystallographyX-ray DiffractionX-ray SpectroscopyComposition ModulationExtended X-ray Absorption Fine StructureLattice Parameter AnalysisLattice Parameter DeterminationLattice Parameter MeasurementMetal Thin FilmsX-ray Absorption SpectroscopyX-ray Diffraction Analysis
Multilayers of Fe/Ni with equal thickness of Fe and Ni layers have been deposited on Si and glass substrates using ion-beam sputtering with composition modulation wavelength λ ranging from 20 to 160 Å. X-ray diffraction scans using Cu Kα radiation were made to look for the satellite peaks that are the signature of coherent multilayers. Satellite peaks were observed only when argon ion-assisted deposition was used in preparing the multilayers. Read photographs using Fe Kα radiation show that the films are highly textured. All the diffraction rings in the Read photograph can be identified to a single face-centered-cubic (fcc) lattice for λ≤36 Å. For higher wavelengths, rings corresponding to body-centered-cubic (bcc) Fe were observed in the Read photographs. Extended x-ray absorption fine structure (EXAFS) measurements taken above the Fe K edge indicate that the Fe in the Fe/Ni multilayers are in fcc and bcc phases for wavelengths of 27.6 and 120 Å, respectively. The average lattice parameter shows an enhancement with decreasing wavelength that is proportional to 1/λ for 26.4≤λ≤52.0 Å.