The Journal of Adhesion · 1997 · 29 citations · 9 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsStructural AnalysisThermal AnalysisAdhesive BondingJoint StrengthResidual Stress In JointsStrength Of MaterialsTensile PropertiesThermal StressesAdhesive Bonded JointsAxial LoadsResidual Stress In Lap JointsResidual Thermal StressesTensile StrengthThermal Residual StressesUltimate Strength AnalysisUltimate Tensile Strength
Abstract The static tensile load bearing capability of adhesively-bonded tubular single lap joints calculated using linear mechanical adhesive properties is usually far less than the experimentally-determined one because the majority of the load transfer of adhesively-bonded joints is accomplished by the nonlinear behavior of the rubber-toughened epoxy adhesive In this paper, both the nonlinear mechanical properties and the residual thermal stresses in the adhesive resulting from joint fabrication were included in the stress calculation of adhesively-bonded joints. The nonlinear tensile properties of the adhesive were approximated by an exponential equation which was represented by the initial tensile modulus and ultimate tensile strength of the adhesive. From the tensile tests and the stress analyses of adhesively-bonded joints, a failure model for adhesively-bonded tubular single lap joints under axial loads was proposed.
9
The Stresses in an Adhesive Layer
N.L. Harrison, W. J. Harrison · The Journal of Adhesion · 1972 · 52 citations
Natural Sciences, Materials Engineering, Materials Science +13