Acta chimica slovenica · 2015 · 10 citations · 22 references
EngineeringMaterials EngineeringMaterials ScienceSurface ChemistrySurface EngineeringSurface ScienceCoating ProcessesCoating TechnologyCoatingsSurface CoatingsSurface HardnessSurface ModificationCoating CharacterizationCoating DeteriorationDryingElectrochemical Impedance AnalysisElectrochemical Impedance MonitoringFilm FormationMetallic CoatingsPaint Coatings
High solid (HS) alkyd resins with low amount of volatile organic compounds (VOC) were developed as the result of new VOC solvent directive that limit the amount of VOC in decorative paints. Due to specific chemical structure of HS alkyd resins and possible deterioration of some applicative properties the optimal combination of driers is an important subject of research. In our present work we studied the influence of iron (Fe) and cobalt (Co) surface driers with strontium (Sr) through drier on the film formation of HS alkyd coatings. The kinetics of autoxidation was analysed using FT-IR spectroscopy. Further, applicative properties like drying time and film hardness were examined. In the end, electrochemical impedance spectroscopy (EIS) was used to evaluate the quality of cured HS alkyd coating films after exposure in the humidity chamber. It was established that the addition of the Sr drier to surface driers accelerates the film formation process. As higher amounts of the Sr drier were added, final drying times were reduced and film hardness increased. The highest quality of cured films were observed for Co/Sr and Fe/Sr drier combination at 1:1 concentration ratio.
22
Alkyd resins: From down and out to alive and kicking
A. Hofland · Progress in Organic Coatings · 2011 · 198 citations