The Journal of the Acoustical Society of America · 2014 · 109 citations · 27 references
Natural SciencesPhysicsAcoustic DesignAcousticsComputational AcousticsAcoustic ModelingArchitectural AcousticsRoom AcousticsSound SynthesisAcoustic Transducer ArraysContrastEnergySound Field ReproductionSound Field SynthesisSound Pressure Level
The sound‑zone problem—using loudspeakers to create a high‑pressure listening region while suppressing sound elsewhere—has been studied since the 1990s, with solutions drawn from wave‑field synthesis and beamforming, yet their differing properties and comparative performance remain unclear. This study evaluates the suitability of energy‑focusing, energy‑cancellation, and synthesis approaches for sound‑zone reproduction. An anechoic simulation with a circular array shows each method exhibits distinct acoustic contrast, array‑control effort, and planarity, and that regularization markedly reduces array effort and improves contrast, especially under mismatched calculation‑application conditions.
Since the mid 1990s, acoustics research has been undertaken relating to the sound zone problem—using loudspeakers to deliver a region of high sound pressure while simultaneously creating an area where the sound is suppressed—in order to facilitate independent listening within the same acoustic enclosure. The published solutions to the sound zone problem are derived from areas such as wave field synthesis and beamforming. However, the properties of such methods differ and performance tends to be compared against similar approaches. In this study, the suitability of energy focusing, energy cancelation, and synthesis approaches for sound zone reproduction is investigated. Anechoic simulations based on two zones surrounded by a circular array show each of the methods to have a characteristic performance, quantified in terms of acoustic contrast, array control effort and target sound field planarity. Regularization is shown to have a significant effect on the array effort and achieved acoustic contrast, particularly when mismatched conditions are considered between calculation of the source weights and their application to the system.
27