IEEE Transactions on Applied Superconductivity · 2013 · 11 citations · 6 references
Natural SciencesElectrical EngineeringMaterials ScienceElectromagnetismMaterials CharacterizationMechanical Behavior Of MaterialsElastic DeformationMaterial TestingStrength Of MaterialsStress-strain BehaviorTensile PropertiesCable MaterialsCable StructuresTensile DeformationTensile LoadingTensile LoadsTensile StrainTensile TestingWire Material Properties
To form a cable-in-conduit conductor (CICC) a cable should be inserted into a jacket under tensile force that is increasing with length of insertion. This tensile force can lead to both elongation and untwisting of a cable with increase of a twist pitch. The untwisting can also be induced by stress accumulated in the material during the cabling process. Understanding the untwisting process is very important, because the twist pitch of a cable inside a CICC strongly affects properties such as ac loss. In this paper, we present the results of an experiment on RF toroidal field (TF) cable sample tensile tests using the ≪Hitachi Cable≫ (Japan) tensile machine, and also the results of an experiment performed at the jacketing line in the Russian Scientific R&D Cable Institute (VNIIKP) after TF cable reinsertion. In the latter experiment, twist pitches were measured along the full cable length. A model to calculate untwisting and stretching processes has been developed. The results of the calculations are compared with the experimental data.
6
N. Mitchell, D. Bessette, R. Gallix et al. · IEEE Transactions on Applied Superconductivity · 2008 · 285 citations
Status of ITER Conductor Development and Production
A. Devred, I. Backbier, D. Bessette et al. · IEEE Transactions on Applied Superconductivity · 2012 · 167 citations
ITER R&D: Magnets: Conductor and Joint Development
Hiroshi Tsuji, S. Egorov, J.V. Minervini et al. · Fusion Engineering and Design · 2001 · 20 citations