Progress In Electromagnetics Research Letters · 2008 · 19 citations · 21 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials CharacterizationAlloysConductive MaterialsElectrical ConductivityElectrical Properties Of CeramicsPowder ProcessingSinteringConductionConductivityElectrical ResistivityFerritesN-type ConductivityP-type ConductivitySintering BehaviorTemperature Dependence Of Electrical Properties
Copper-cobalt ferrites with general chemical formula Cu x Co 1-x Fe 2 O 4 (with x = 0.0, 0.4, 0.6 & 1.0) were prepared by ceramic method. The solid state reaction was confirmed by XRD patterns. DC conductivity was measured by two probe method. Electrical resistivity is found to increase on lowering of sintering temperature and time. At x = 1.0, the conduction is mainly due to hopping of electrons leading to n-type conductivity while at x = 0.0, conduction is due to holes leading to P-type conductivity. The lowest conduction at x = 0.4 is attributed to the electron hole compensation. SEM micrographs were obtained from JEOL scanning electron microscope. The micrographs reveal that an average grain size increases with sintering temperature and time as a result of decrease in porosity. This leads to the decrease in resistivity with sintering temperature and time. One of the factors for higher conductivity in ferrites is an increase in average grain size and decrease in pore concentration during the heat treatment.
21