Nafion/Zeolite Nanocomposite Membrane by in Situ Crystallization for a Direct Methanol Fuel Cell

Zhongwei Chen, Brett A. Holmberg, Wenzhen Li, Xin Wang, Ronnie Munoz, Yushan Yan

Chemistry of Materials · 2006 · 286 citations · 43 references

Concepts

TL;DR

The study proposes a method to prepare Nafion/acid functionalized zeolite Beta nanocomposite membranes via in situ hydrothermal crystallization. The method uses in situ hydrothermal crystallization to incorporate acid‑functionalized zeolite Beta into Nafion. The resulting membranes exhibit slightly lower proton conductivity but a 40 % reduction in methanol permeability, and when used in direct methanol fuel cells deliver 3 % higher open‑circuit voltage and 21 % higher maximum power density at 1 M methanol, rising to 14 % OCV and 93 % power density at 5 M, while showing slightly lower tensile strength but higher elastic modulus compared with commercial Nafion 115.

Abstract

A method for preparing Nafion/acid functionalized zeolite Beta (NAFB) nanocomposite membranes by in situ hydrothermal crystallization is described. The nanocomposite membranes have a slightly lower proton conductivity but a markedly lower methanol permeability (ca. 40% reduction). When tested with 1 M methanol feed, the direct methanol fuel cells (DMFCs) with the NAFB composite membranes have a slightly higher open circuit voltage (OCV; 3%) and much higher maximum power density (21%) than those with the pure Nafion 115 membranes. With a higher methanol concentration (5 M), the DMFCs with the NAFB composite membranes demonstrate a 14% higher OCV and a 93% higher maximum power density than those with the pure Nafion 115 membranes. Compared with the commercial Nafion 115 membranes, the NAFB composite membranes have slightly lower tensile strength but higher elastic modulus.

References

43