International Journal of Chemical Engineering · 2010 · 21 citations · 4 references
Natural SciencesMaterials EngineeringMaterials ScienceChemical KineticsMaterials ChemistryNanomaterialsAerosol ScienceExplosion HazardsNanoscale MaterialsNucleationParticle SizePowder MetallurgyAlumina NanoparticlesDust ExplosionFilamentous FormMelting TemperatureMetal PowdersNanoparticlesSpherical AgglomeratesSpherical Morphology
In the experiment, nanoparticles of 35 nm Al and 100 nm Al powders, respectively, formed particles with average sizes of 161 nm and 167 nm in agglomeration. The characteristics of dust cloud explosions with the two powder sizes, 35 nm and 100 nm, revealed considerable differences, as shown here: (dp/dt) max-35 nm = 1254 bar/s, (dp/dt) max-100 nm = 1105 bar/s; P max-35 nm = 7.5 bar, P max-100 nm = 12.3 bar, and MEC -35 nm = 40 g/m 3 , MEC -100 nm = 50 g/m 3 . The reason of P max-35 nm value is smaller than P max-100 nm may be due to agglomeration. From an analysis of the explosive residue, the study found that nanoparticles of 35 nm Al powder became filamentous strands after an explosion, where most of 100 nm Al nanoparticles maintained a spherical structure, This may be because the initial melting temperature of 35 nm Al is 435.71°C, while that for 100 nm Al is 523.58°C, higher by 87.87°C. This study discovered that explosive property between the 35 nm Al and 100 nm Al powders after agglomeration were different.
4
Stability of commercial metal oxide nanoparticles in water
Yang Zhang, Yongsheng Chen, Paul Westerhoff et al. · Water Research · 2007 · 612 citations
Kenneth L. Cashdollar · Journal of Loss Prevention in the Process Industries · 1996 · 230 citations
The ignitability of coal dust-air and methane-coal dust-air mixtures
Paul Amyotte, Kenneth J. Mintz, Michael J. Pegg et al. · Fuel · 1993 · 94 citations