Die Makromolekulare Chemie · 1982 · 36 citations · 8 references
Natural SciencesChemical EngineeringChemistryCatalysisChemical KineticsPolymer ChemistryPolymer AnalysisPolymer CharacterizationPolymer SynthesisPolymerization ChemistryPolymerization KineticsPolymerization ProcessesCatalyst KineticsIsotactic PolymerizationPolymerization CatalystsPolymerization MechanismsRadioactivity MeasurementReactivityZiegler - Natta PolymerizationZiegler-natta Polymerization
Abstract A modified method for the determination of the number of isotactic sites C * and the overall propagation rate constant k̄ p of propene polymerization catalysts with 14 C‐labelled carbon oxides is proposed: an excess of 14 CO 2 or 14 CO is added in the abscence of propene and alkylaluminium to a non‐deactivated polymer sample drawn from the polymerization slurry. The specific radioactivity of the polymer as a function of the time of contact with the radio‐actively labelled inhibitor sharply increases within short times of contact ( 14 CO 2 ≤ 20 min, 14 CO ≤ 5 min). This is followed by a slower further increase reaching a finite value after 5 to 7h. The initial and end values differ by a factor of 2 to 3. The results are explained in terms of sites with different reactivity assuming that the total number of isotactic sites is determined only after long times of contact with the inhibitor. So far c * was determined with 14 CO 2 or 14 CO by adding the inhibitor during the polymerization in the presence of propene and alkylaluminium; c * was calculated after short times of contact with the inhibitor, whereas the further steady increase in specific radioactivity was exclusively attributed to side reactions caused by reaction with propene and alkylaluminium. By this modified method we obtained for TiCl 3 ·(1/3)AlCl 3 at 60°C k̄ p = 13 dm 3 /(mol·s) and c * = 0,012 mol Ti*/mol Ti total . Addition of a free Lewis base to the polymerization mixture increases c * leaving k̄ p unchanged. In contrast to this, if TiCl 3 ·(1/3) AlCl 3 is milled with a Lewis base k̄ p can be increased by a factor of ≈ 2,5 with lower or equal c * ‐values. The higher activity of extracted TiCl 3 ‐catalyst is due to higher k̄ p and c * ‐values as compared to those using TiCl 3 ·(1/3) AlCl 3 .
8
On the kinetics of propylene polymerization
Erwin Kohn, H. J. L. Schuurmans, J. V. Cavender et al. · Journal of Polymer Science · 1962 · 73 citations
Nikolay B. Chumaevskii, Vladimir A. Zakharov, Gennadii D. Bukatov et al. · Die Makromolekulare Chemie · 1976 · 70 citations