AIAA Journal · 1974 · 18 citations · 1 references
EngineeringChemical EngineeringMechanical EngineeringCombustionFluid DynamicsHeat TransferCombustion FundamentalsCombustion In EnginesCombustion KineticsCombustion ProcessesDroplet CombustionSpray CombustionCombustion DynamicsDragFuel Spray CombustionHydrodynamic DragSpray Combustion ModelingSteady-state FlowVaporizationVaporization Modeling
A constant cross-sectional area rocket motor was used to study the combustion of a spray of ethanol drops in oxygen. The steady-state spray equation was solved for monodisperse and distributed initial drop radii and for various drag and vaporization rate equations. The local flux of liquid ethanol drops thus calculated was compared with the experimentally determined one for the purpose of selecting a proper over-all spray combustion model. The main conclusion is that a model made up of a Nukiyama-Tanasawa initial drop radii distribution function, a Stokes drop drag equation, and either a modified Priem-Heidmann or a modified Spalding drop vaporization rate equation reproduced accurately the steady state of the engine tested. The original Priem-Heidmann and Spalding vaporization rate equations, which were suggested for single fuel droplets vaporizing and burning in infinite oxidizing media, were found to overestimate the vaporization rate of the droplets within the spray. Moreover, they would have lead to the erroneous conclusion that most of the vaporization occurs in the first few inches of the combustor, and the remaining lingers on at great length, while the actual vaporization is considerably more uniformly distributed in the axial direction. The monodisperse spray models, corresponding to the acceptable distributed spray models, gave acceptable results as well (in this case r0 = 5r30/3.915).
1
Seiichiro Kumagai, Hiroshi Isoda · Nature · 1950 · 11 citations · Full text
Engineering, Chemical Engineering, Mechanical Engineering +10