Bagasse filled recycled polyethylene bio-composites: Morphological and mechanical properties study

Johnson Olumuyiwa Agunsoye, Victor Sunday Aigbodion

Results in Physics · 2013 · 133 citations · 14 references

DOIFull text

Open access

Concepts

TL;DR

Bagasse‑filled recycled polyethylene composites were fabricated by compounding and compressive molding, using uncarbonized and carbonized bagasse particles at 10–50 wt % to produce two sets of composites whose microstructure and mechanical properties were subsequently examined. Uniform distribution of bagasse particles enhances rigidity, hardness, tensile and bending strengths—peaking at 20 wt % uncarbonized and 30 wt % carbonized—while higher loadings reduce impact energy and fracture toughness, indicating optimal performance at 30 wt % bagasse with carbonized particles limited to 30 wt %.

Abstract

Bagasse filled recycled polyethylene bio-composites were produced by the compounding and compressive molding method. Two sets of composites were produced using uncarbonized (UBp) and carbonized (CBp) bagasse particles by varying the bagasse particles from 10 to 50 wt%. The surface morphology and the mechanical properties of the composites were examined. The results showed that the uniform distribution of the bagasse particles in the microstructure of the polymer composites is the major factor responsible for the improvement of the mechanical properties. The bagasse particles added to the RLDPE polymer improved its rigidity and the hardness values of the composites. The tensile and bending strengths of the composite increased with increasing percentage of the bagasse to a maximum of 20 wt%UBp and 30 wt%CBp. The impact energy and fracture toughness decreases with wt% bagasse particles. The developed composites have the best properties in the ranges of 30 wt% bagasse particle additions and for optimum service condition, carbonized bagasse particles addition should not exceed 30 wt%.

References

14