A Step Change in Total System Approach through Wired Drillpipe Technology

Vebjørn Nygaard, M. M. R. Jahangir, Trond Gravem, Eugene Nathan, John Evans, Mike Reeves, Henrik Wolter, Sigve Hovda

2008 · 30 citations · 2 references

Concepts

Abstract

Abstract The demand for increased oil and gas recovery requires the drilling of complex extended reach wells with optimized reservoir exposure for production and minimized overall production costs. In order to achieve these objectives, the use of high-end drilling and logging technology to optimize well placement is of the essence. However, the optimal utilization of this technology is often limited by the real-time transmission bandwidth of essential data from and to the downhole tools. The introduction of wired drillpipe technology has facilitated a step change in two-way data communication resulting in a high-speed data transmission giving much greater volume, resolution and quality of formation evaluation data and drilling dynamics data. Furthermore, the direct control of rotary steerable tools has now been enhanced to allow instantaneous programming changes and better utilization of dynamics data to enhance the decision making process required to address drilling dysfunction challenges, hole quality, gross ROP and BHA reliability. The high bandwidth technology was used while drilling two laterals on the Troll field's reservoir in the Norwegian North Sea in 2007. The memory quality data was transferred through wired drillpipe to the surface while geosteering through relatively unconsolidated sandstones with localized zones of hard calcite cementation. The bottom hole assembly employed, comprised multiple formation evaluation and dynamics sensors to fully understand the downhole drilling conditions. The data was transferred to the expert advisory centre onshore for advanced processing and interpretation to enable the critical decision making process. The adoption of a Total Systems Approach to select the ideal combination of application-specific drill bit, drilling system, and appropriate procedures and practices was presented and described by Stavland, et al (2006). Realizing the full benefit of the approach has been hampered by bandwidth restriction and time lag associated with conventional mud pulse telemetry. This paper will discuss how wired drillpipe technology has been utilized to enhance the Total System Approach concept during the first tests and how it will affect operations going forward.

References

2