Lattice parameters of cementite in iron-carbon-silicon alloy

Tatsuki Okamoto, Akinori Kagawa

Metal Science · 1977 · 11 citations · 2 references

Concepts

Abstract

The lattice parameters of cementite extracted from Fe-C and Fe-C-Si alloys after water-quenching from various temperatures between 600 and 1000°C were measured. An increase in quenching temperature reduced the a and b parameters and increased the c parameter of these alloys. The variation in the parameters with Si content became less at a lower quenching temperature. On the basis of electron microprobe analysis and Curie temperature measurement of cementite, the effect of Si on the lattice parameters was found to be caused by an increased carbon concentration of cementite which resulted from increased silicon concentration in austenite but not in cementite.

References

2