Improving Injector Efficiencies Using Streamline Simulation: A Case Study in a Giant Middle East Field

S. G. Ghori, Shahaab Jilani, Ahmed H. Alhuthali, Dimitrios Krinis, Anil Kumar

SPE Middle East Oil and Gas Show and Conference · 2007 · 23 citations · 10 references

Concepts

Abstract

Abstract Improving and quantifying injector efficiency is a major aspiration in waterflooding operations. Streamline simulation (SL) has a unique advantage over finite-difference simulation because of its ability to quantify the relationships between injectors and producers and to visualize fluid flow patterns. In this study, streamline simulation was applied to a giant Middle East field to optimize and set injection targets. The objectives were to: (a) formulate an optimization methodology to enhance the overall field injection efficiency and generate injection rates using streamline simulation and (b) constrain the optimization procedure to realistic field conditions to ensure direct field implementation. The ultimate goal is to employ this methodology for routine reservoir management purposes to enhance pressure support and maximize sweep efficiency. The optimization of injection efficiency is based on increasing the injection rates in efficient injectors and decreasing them by the same amount in inefficient injectors within predefined segments of the field. The boundaries of these segments were established from streamline patterns. It was observed that each segment could be dealt with separately, since each segment was quite independent in terms of injection-production patterns. With streamline simulation, we were able to generate a workflow that identifies a) distribution of injected water to associated producers, b) water loss to the aquifer, c) percentage of oil produced due to each supporting injector, and d) amount of watercut attributable to each supporting injector. With the proposed methodology the injector efficiencies were increased from 5%-15%, whereas the overall efficiency of each segment was increased by 5%-7%. Considering the size of the giant field, this increase in injector efficiency was significant in the incremental oil recovery. Field examples are presented that show the proposed methodology is beneficial in increasing the overall efficiency, determining monthly injection targets, improving field oil production, and reducing water production.

References

10