Journal of Structural Engineering · 1999 · 174 citations · 6 references
EngineeringCivil EngineeringEarthquake EngineeringSeismic DesignStructural EngineeringEarthquake Response Of StructuresLateral Load ResistanceStructural DesignStructural LoadsStructural Response AnalysisStructural TestingFramesIn-plane Seismic ResponseMasonry ArchesMasonry Infill WallsMembrane Traction ForcesShake Table TestingStiffnessStructural Clay Tile
Several bidirectional tests were performed on structural clay tile infilled steel frames to assess the interaction of in-plane and out-of-plane forces and to understand the behavior of damaged infills. Tests consisted of in-plane and out-of-plane uniform lateral load tests, out-of-plane drift tests, sequential tests (in-plane damage followed by out-of-plane loading, and out-of-plane damage followed by in-plane loading), one combined in-plane and out-of-plane test, and a seismic shake table test. Infill panels had sufficient out-of-plane stability under both inertial (uniform) loads and imposed drift loads. This stability was due to arching, or the development of in-plane membrane forces. The interaction of in-plane and out-of-plane forces was not significant, particularly at moderate levels of loading. The primary effect of sequential loading was loss of in-plane stiffness due to elimination of the diagonal cracking limit state. Under combined in-plane and out-of-plane loading, the infill remained remarkably stable, even after much damage to the masonry panel.
6
Behavior of Reinforced Concrete Frames with Masonry Infills
Ricardo E. Angel, Daniel P. Abrams, D. M. Shapiro et al. · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · 1994 · 135 citations · Full text
Engineering, Architectural Engineering, Civil Engineering +14