Transportation Research Board 90th Annual MeetingTransportation Research Board · 2011 · 14 citations · 0 references
EngineeringCivil EngineeringMaterials EngineeringBuilding MaterialsMaterials CharacterizationPavement EngineeringAsphalt MaterialsPavement DesignPavement EvaluationPavement Performance AnalysisPavement Structural AnalysisShear StrengthAsphalt BinderBindersDynamic ModulusHot Mix AsphaltMechanistic-empirical AnalysisMechanistic-empirical DesignMechanistic-empirical Pavement DesignStiffness
The current version of the Mechanistic-Empirical Pavement Design Guide (MEPDG) includes two different models for the hot-mix asphalt (HMA) dynamic modulus (E*) prediction. In MEPDG levels 2 and 3 hot mix asphalt (HMA) stiffness characterization; users can choose either one of these two models. The first model is the NCHRP1-37A viscosity-based model while the second one is the NCHRP1-40D binder shear modulus-based model. The main difference between the two models is the binder stiffness characterization parameter. Moreover, MEPDG allows users to choose between three hierarchical input levels for binder stiffness characterization. This paper focuses on the evaluation of the influence of the binder characterization input level on the prediction accuracy of the MEPDG E* predictive models. In this study, a total of 22 HMA mixtures commonly used in Idaho with six binder grades were investigated. Binder characterization data were obtained from Brookfield viscosity testing for MEPDG level 1 analysis for conventional binders, Dynamic Shear Rheometer (DSR) testing for MEPDG level 1 analysis for Superpave binders, and typical MEPDG values (MEPDG level 3 analysis). Comparison between laboratory measured and predicted E* values along with the three investigated binder characterization cases, revealed that both MEPDG E* predictive models resulted in reasonable E* predictions. The 1-37A E* model along with MEPDG level 3 binder inputs yielded the most accurate and least biased E* estimates for Idaho mixtures. Nevertheless, the lowest prediction accuracy and highest bias in the E* estimates, especially at the higher temperatures, resulted from the 1-40D model with MEPDG level 3 binder characterization.