Journal of Nuclear Materials · 2008 · 35 citations · 12 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMechanical Behavior Of MaterialsMetallurgyCorrosion EngineeringCorrosion MechanismsCorrosion-resistant MaterialsLocalized CorrosionRadiation Damage In MaterialsStress Corrosion CrackingIrradiation-assisted CorrosionIrradiation-assisted Stress Corrosion CrackingMicrostructure Effects On CorrosionRadiation-induced CorrosionResidual StrainStrain LocalizationStress Corrosion Cracking Kinetics
The radiation-induced microstructure, strain localization, and iodine-induced stress corrosion cracking (I-SCC) behaviour of recrystallized Zircaloy-4 proton-irradiated to 2 dpa at 305 °C was examined. <a> type dislocation loops having 1/3〈1 1 2¯ 0〉 Burgers vector and a mean diameter and density of, respectively, 10 nm and 17 × 1021 m−3 were observed while no Zr(Fe,Cr)2 precipitates amorphization or Fe redistribution were detected after irradiation. After transverse tensile testing to 0.5% macroscopic plastic strain at room temperature, almost exclusively basal channels were imaged. Statistical Schmid factor analysis shows that irradiation leads to a change in slip system activation from prismatic to basal due to a higher increase of critical resolved shear stresses for prismatic slip systems than for basal slip system. Finite element calculations suggest that dislocation channeling occurs in the irradiated proton layer at an equivalent stress close to 70% of the yield stress of the irradiated material, i.e. while the irradiated layer is still in the elastic regime for a 0.5% applied macroscopic plastic strain. Comparative constant elongation rate tensile tests performed at a strain rate of 10−5 s−1 in iodized methanol solutions at room temperature on specimens both unirradiated and proton-irradiated to 2 dpa demonstrated a detrimental effect of irradiation on I-SCC.
12