High Frequency Masw For Non-Destructive Testing Of Pavements—Accelerometer Approach

Nils Rydén, Peter Ulriksen, Choon B. Park, Richard D. Miller, Jianhai Xia, Julian Ivanov

14th EEGS Symposium on the Application of Geophysics to Engineering and Environmental Problems · 2001 · 33 citations · 12 references

Concepts

Abstract

The dispersive nature of surface waves in pavement systems is imaged through a multichannel approach using one accelerometer as receiver and multiple shot points. The image obtained from a wavefield transformation method shows multimodal dispersion curves up to 10 kHz.<br>We present results from a simplified MASW data acquisition method applied to a pavement<br>surface. The method can simulate an arbitrary number of channels. The sensor separation can be<br>chosen arbitrarily small. In these experiments, the upper frequency limit is 10 kHz, which can be<br>increased by the exchange of one sensor. The method is tested by one manual and one automated<br>procedure. Both rely on source-receiver reciprocity. The automated procedure is regarded as<br>necessary when a large number of channels is combined with a small sensor separation. The<br>manual method will not provide the necessary accuracy and endurance for that kind of<br>measurement, but is promising for less complicated setups. We present recommendations for<br>high frequency measurements on pavements.<br>In the subsequent data processing, we follow the procedure of multichannel analysis of<br>surface waves - MASW. It has recently been developed as a geophysical method for near-surface<br>investigation. We demonstrate that the MASW technique can identify detailed aspects of the<br>high frequency total wave-field of both surface and body-wave events.<br>Results of dispersion curve extraction indicate that higher modes of surface waves are<br>dominating at depths associated with the transition between the asphalt and the base layer.<br>However, the deviation from the fundamental mode is not large because all modes are<br>converging in an asymptotic manner with increasing frequency. The study indicates that the MASW method is a fast and cost efficient method for measuring pavement stiffness parameters.

References

12