Journal of Polymer Science Part A Polymer Chemistry · 1992 · 103 citations · 9 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsAnisotropic MaterialsLiquid Crystal MaterialsLiquid CrystalsMagnetic AnisotropyThermosetsThermosetting PolymersCrosslink Density EffectsDiffraction AnalysisGlass TransitionGlass Transition TemperatureLiquid Crystal Polymer MaterialsLiquid Crystalline PolymersPolymer Crystal OrientationThermal Expansion
Abstract The processing of a new series of liquid crystalline (LC) epoxy networks was evaluated. Above the glass transition temperature, the low crosslink density networks could be mechanically aligned. The mechanically oriented networks readily lost orientation upon heating. Highly anisotropic liquid crystalline (LC) epoxy networks were also prepared by aligning the mesophase of the prepolymer during the curing process under the influence of a magnetic field. Orientation parameters ( f ) of 0.13 to 0.57 were achieved by these processes as determined by x‐ray diffraction analysis. The ability of the magnetically aligned networks to retain their orientation above the glass transition temperature was determined by time‐resolved x‐ray diffraction. The stability of the alignment of these networks was found to depend on crosslink density. The effect of the anisotropy of these networks was investigated by measuring the coefficient of thermal expansion (CTE). In the aligned networks, there was a substantial reduction in CTE parallel to the direction of the applied field compared to the randomly oriented networks. © 1992 John Wiley & Sons, Inc.
9