Toward Energy-Efficient 5G Wireless Communications Technologies: Tools for decoupling the scaling of networks from the growth of operating power

Renato L. G. Cavalcante, Sławomir Stańczak, Martin Schubert, Andreas Eisenblaetter, Ulrich Tuerke

IEEE Signal Processing Magazine · 2014 · 111 citations · 25 references

Concepts

TL;DR

The densification of wireless networks and the proliferation of small cells raise total energy consumption, with hardware such as coolers and circuits dominating the energy budget rather than radiated power. The paper seeks to design energy‑efficient 5G architectures that can dynamically shut down or reconfigure infrastructure nodes in response to traffic demand. To achieve this, the authors model infrastructure as a demand‑responsive resource and formulate optimization problems that release nodes based on traffic forecasts while accounting for interference coupling in dense deployments.

Abstract

The densification and expansion of wireless networks pose new challenges on energy efficiency. With a drastic increase of infrastructure nodes (e.g. ultradense deployment of small cells), the total energy consumption may easily exceed an acceptable level. While most studies focus on the energy radiated by the antennas, the bigger part of the total energy budget is actually consumed by the hardware (e.g., coolers and circuit energy consumption). The ability to shut down infrastructure nodes (or parts of it) or to adapt the transmission strategy according to the traffic will therefore become an important design aspect of energy-efficient wireless ? ?architectures. Network infrastructure should be ?regarded as a resource that can be occupied or released on demand, and the modeling and optimization of such systems are highly nontrivial problems. In particular, elements of the network infrastructure should be released by taking into account traffic forecasts to avoid losing the required coverage and capacity. However, even if traffic profiles were perfectly known, the determination of the elements to be released is complicated by the potential interference coupling between active elements and the sheer size of the optimization problems in dense networks.

References

25