SPE Asia Pacific Oil and Gas Conference and Exhibition · 2004 · 16 citations · 18 references
EngineeringChemical EngineeringEnvironmental EngineeringReservoir EngineeringSubsurface Fluid FlowWater TreatmentFluid-flow In Porous MediaReservoir StimulationSurfactantsAcid DiversionAcid StimulationAmphoteric SurfactantsDisposalMatrix StimulationPolymer-surfactant SystemsStimulation TreatmentsSurfactant Systems
Abstract Application of matrix stimulation treatments in horizontal wells with openhole completions is a challenging task. Acid diversion is one of the key factors that determine the success of these treatments. This is especially true when the target zone has high permeability streaks. Proper acid distribution in carbonate formations can be achieved by increasing the viscosity of the acid in-situ. This can be done by using polymer/cross-linker or viscoelastic surfactant acid systems. The latter system was selected in the present study because of the tight nature of the reservoir and the presence of hydrogen sulfide in the disposal water. Both factors do not favor the use of polymer-based acids. The surfactant used in the diversion stage is amphoteric. It carries a positive charge in the presence of live HCl acid. Once the acid reacts with the carbonate minerals, the pH of the solution rises and the concentrations of divalent cations (calcium and magnesium) increase. Both factors enhance the viscosity of the solution in-situ. This high viscosity will help in diverting the live acid into other un-stimulated zones. Once the acid stimulation is complete, the high viscosity of spent acid can be broken either by dilution with the injection water or by adding mutual solvent in the pre and post-flushes. Viscoelastic surfactant-based acids have been successfully used to stimulate oil and gas wells over the last three years. This is the first time these acids were used to matrix acidize water disposal wells worldwide. No operational problems were encountered. Injectivity tests conducted after the acid treatment indicated that the treatment removed the damage; iron sulfide, calcium carbonate particles and trapped oil droplets. The skin factor decreased from + 22 before the treatment to nearly zero after the treatment. The pumping rate increased by a factor of three and the injectivity index increased by a factor of 14. The well maintained its injectivity up to the present time (more than seven months after the treatment) and still showing no signs of decline. An additional benefit of the viscoelastic surfactant acid system is its ability to decrease friction losses during acid pumping. Field data are given to support this new benefit.
18
J. L. Zakin, Bin Lu, Hans-Werner Bewersdorff · Reviews in Chemical Engineering · 1998 · 259 citations