Laboratory Design and Field Demonstration of Steam Diversion with Foam

N. F. Djabbarah, Shlomo Weber, David Freeman, J. A. Muscatello, James Ashbaugh, Thomas E. Covington

SPE California Regional Meeting · 1990 · 32 citations · 8 references

Concepts

Abstract

Abstract Mobil conducted a foam-steam diversion test to achieve the following objectives: Confirm laboratory results which show foam generation with steam in unconsolidated sands. Establish the feasibility of steam flow diversion by foam in complex reservoir sands. Determine the effect of varied injection strategies on the steam-foam generation process, and Determine incremental oil recovery attributed to foam. Laboratory experiments are presented which evaluate foaming surfactants at simulated steamflood conditions using reservoir rock and fluids. Surfactant loss due to adsorption, partitioning, and thermal decomposition are all included, together with displacement results in sandpacks. It is shown that foam will form and propagate at steamflood conditions. A satisfactory injection strategy involves continuous balance between surfactant loss and foam propagation. Feasibility was demonstrated in a heavy oil reservoir in two contiguous ten-acre inverted nine-spot patterns. Foam, generated at the surface by mixing surfactant with a noncondensible gas (and steam) and injected in a reservoir-specific intermittent on/off cycle, was maintained in the reservoir, as proven by injector wellhead pressure increases. Tracer tests and casing gas analyses showed that foam redistributed steam across the vertically heterogeneous oil sand, increasing volumetric sweep and oil production. Approximately 178,000 lbs of surfactant and 15 MMSCF of nitrogen were injected.

References

8