Journal of Applied Physics · 1996 · 89 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationOptical MaterialsThin FilmsChemical Vapor DepositionCoatingsOptical Thin FilmsSemiconductor SurfacesThin Film Optical PropertiesThin-film MaterialsAnnealingDielectric ConstantEllipsometryMetalorganic Chemical Vapor DepositionOptical ConstantsOptical PropertiesSpectroscopic EllipsometryTin-doped Indium Oxide
Sputtered tin-doped indium oxide (ITO) coatings were investigated by UV-visible spectroscopic ellipsometry at different angles of incidence. The results were fitted using a classical dispersion formula for the optical constants of ITO in a model structure with a compact homogeneous film and a top layer representing surface roughness. Typical values for the high-frequency dielectric constant ε∞ and the plasma frequency ωp were found to be 3.4–4.0 and 0.68–0.96 eV, respectively. The influence of oxidative and reducing annealing at 400 °C was studied. No difference was observed under reducing conditions, but oxygen annealing reduced the influence of the plasma frequency on the studied UV-visible region significantly. To prove the usefulness of the dispersion formula, TiO2 and Nb2O5 films were grown on ITO by metalorganic chemical vapor deposition using Ti(acac)2(i-pro)2 and Nb(OEt)5 as precursors. These bilayers were studied by spectroscopic ellipsometry and could be successfully described applying the previously determined optical constants of ITO and a transparent Cauchy dispersion formula for the deposited oxide.
28
<i>Ellipsometry and Polarized Light</i>
R. M. A. Azzam, N. M. Bashara, Stanley S. Ballard · Physics Today · 1978 · 4.3K citations
Natural Sciences, Physics, Optics +13
Anomalous Optical Absorption Limit in InSb
Elias Burstein · Physical Review · 1954 · 3.9K citations
Natural Sciences, Physics, Optics +10
Transparent conductors—A status review
K. L. Chopra, S.S. Major, Dinesh K. Pandya · Thin Solid Films · 1983 · 2.7K citations
Natural Sciences, Electrical Engineering, Materials Science +14