Finned Single-pass Solar Air Heaters with Wire Mesh as an Absorber Plate

Abstract

Single-pass solar air heaters (SAHs) with two and six fins attached and packed with wire mesh layers were experimentally investigated. Wire mesh layers were used between the fins in the place of an absorber plate. The effects of air mass flow rate on the outlet temperature and thermal efficiency were studied. The results showed an increase in the thermal efficiency as the air mass flow rate was increased. The range of the mass flow rate used in this work was between 0.0121and 0.042 kg/s. It was found that for the same mass flow rate the SAH having six fins has higher efficiency compared to the system that has two fins. The maximum efficiencies for the SAHs were obtained at the mass flow rate of 0.042 kg/s. The maximum efficiencies for the six-finned and two-finned SAHs were 79.81% and 71.8%, respectively. In addition, the maximum temperature difference between the inlet and the outlet, ΔT, for the SAH with six fins exceeded the two-finned SAH for the same mass flow rates. The maximum ΔT was 51.1°C for the six-finned SAH and 44.2°C for the two-finned SAH. As expected, the maximum ΔT for each SAH was obtained at the lowest air mass flow rate (i.e., 0.0121 kg/s). A substantial enhancement in the thermal efficiency was achieved in comparison to the results of a single-flow packed bed collector with those of conventional collectors.