Journal of Applied Polymer Science · 1966 · 39 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsThin FilmsMaterial FilmPolymer CharacterizationPolymer CrystallinityPolymer Thin FilmsThin Film Mechanical PropertiesAging Of Thin FilmsCrystallinity Changes During AgingDensityFilm MorphologyImpact StrengthMechanical Properties Of FilmsPhysical PropertiesPolypropylene
Abstract Data are presented showing that rapidly quenched polypropylene films contain a paracrystalline phase in addition to crystalline and amorphous phases. The density of the paracrystalline phase was found to vary between 0.8890 and 0.9080 g./cm. 3 . Other data show that the density of quenched polypropylene films increases during aging, the increase being a linear function of the logarithm of the film age. The physical properties of the films, secant modulus, impact strength, and coefficient of friction, were found to vary not only with crystallinity, i.e., composition‐dependent density, but also to vary during aging when the density was increasing with little change in crystallinity. An example of this dependence is the increase in secant modulus of 10.9 × 10 6 psi/g./cm. 3 during aging and only 3.7 × 10 6 psi/g./cm. 3 as the crystallinity increased. Because of the three phases and the density–time change, it is possible to have films with the same density and different physical properties and, conversely, films with the same physical properties and different densities.
10
Evidence for a Second Crystal Form of Polypropylene
H. D. Keith, F. J. Padden, N. M. Walter et al. · Journal of Applied Physics · 1959 · 365 citations