Health Physics · 1961 · 15 citations · 0 references
Natural SciencesPhysicsAir PollutionAnalytical ChemistryAtmospheric ChemistryAerosol ScienceAir Pollution MeasurementAir SamplingParticle SizeParticle Size ControlParticulate MatterAerosol Measurement TechniquesAerosol Particle Size DistributionAerosol Size DistributionParticle AnalysisParticle Size CharacterizationParticle Size Distribution MeasurementParticle Size MeasurementParticle-size Distribution
Particle size is recognized as an important factor in evaluating the health hazard of aerosols and, in addition, has other applications in health physics; however, very little published data is available on plutonium aerosols in plant and laboratory operations. Since the concentration of plutonium in most such aerosols is extremely small relative to the normal dust loading of the atmosphere, direct identification and measurement of plutonium particles is impossible. In these studies, an alfa-track technique has been used. The sample is collected on a membrane filter and transferred directly to a nuclear emulsion where it is allowed to remain in contact for various time periods. After development of the film, the number of tracks per particle are counted with the microscope. Assuming the particles are spheres of pure plutonium oxide, the particle diameter can be calculated from the number of tracks. Limitations of the technique are discussed. General air samples and breathing zone samples were collected in a processing plant where plutonium metal is handled in glove boxes. The operations conducted in the rooms included metallurgy and machining of plutonium. Particle sizes measured were mostly less than 0.3 μ with standard deviations of the size distributions being less than 2.0. There was very little variation in these parameters from one operation to another. Reasons for these results are presented. The effect of these data on calculated lung deposition and on sampling efficiency with the annular impactor are discussed.