Transactions of the ASAE · 1985 · 11 citations · 0 references
AgricultureEarth SciencesSoil SciencesSoil PhysicsSoil ScienceSoil-water RelationsHydraulic ConductivitySoil Hydraulic PropertiesSoil Physical PropertiesSoil TestingCore Sampling AnalysisField Measurement Of Hydraulic ConductivityHydraulic Conductivity EstimationHydraulic Conductivity MeasurementHydraulic Conductivity TestingLaboratory Measurement Of Hydraulic ConductivitySaturated Hydraulic ConductivitySilt Loam
ABSTRACT FOUR methods of measuring hydraulic conductivity (K) - soil core, auger hole, double-tube, and drawdown - were evaluated for an alluvial soil in the lower Mississippi Valley. The soil, a Commerce silt loam, fine silty, mixed, non-acid, thermic Aerie Fluvaqent, has a saturated K of approximately 1 mm/h in the layer just below the plow depth and K increases only slightly to a depth of about 0.6 m. Between 0.6 and 1.3 m depth there is a layer of approximately 0.3 m thickness that has a saturated K of up to 80 mm/h. Although K varied considerably, the values were within a range where any one of the four methods tested could be used for estimating hydraulic conductivities provided precautions were taken, such as pressing instead of hammering core sampling rings into the soil.