SAE technical papers on CD-ROM/SAE technical paper series · 2012 · 24 citations · 14 references
EngineeringAutomotive EngineeringMechanical EngineeringCombustionInternal Combustion EnginesProcess ControlCombustion In EnginesCombustion ProcessesEngine DesignEngine EmissionsEngine PerformanceEngine Performance CharacteristicsCompression RatioIgnition DelayInjection Pressure EffectsInjection TimingPartially Premixed CombustionValve TimingVariable Compression RatioVariable Valve Timing
<div class="section abstract"><div class="htmlview paragraph">In order to avoid the high CO and HC emissions associated with low temperature when using high levels of EGR, partially premixed combustion is an interesting possibility. One way to achieve this combustion mode is to increase the ignition delay by adjusting the inlet valve closing timing, and thus the effective compression ratio.</div><div class="htmlview paragraph">The purpose of this study was to investigate experimentally the possibilities of using late and early inlet valve closure to reduce NO<sub>x</sub> emissions without increasing emissions of soot or unburned hydrocarbons, or fuel consumption. The effect of increasing the swirl number (from 0.2 to 2.5) was also investigated. The combustion timing (CA50) was kept constant by adjusting the start of injection and the possibilities of optimizing combustion using EGR and high injection pressures were investigated. Furthermore, the airflow was kept constant for a given EGR level.</div><div class="htmlview paragraph">The engine used in the experiments was a single-cylinder heavy-duty direct injection diesel engine equipped with an electronically controlled unit injector with variable needle opening pressure. Its geometry is based on the Volvo D12C production engine with the compression ratio lowered from 18.5 to 17. The engine is also equipped with a fully flexible pneumatic inlet valve system, enabling both early and late inlet valve closing times and varied swirl levels.</div><div class="htmlview paragraph">The results show that late or early IVC can be used to achieve partially premixed combustion (and thus low soot and NO<sub>x</sub> emissions) without a fuel consumption penalty.</div></div>
14
Internal combustion engine fundamentals
Choice Reviews Online · 1988 · 16.8K citations
Engineering, Chemical Engineering, Mechanical Engineering +17