Monitoring permanent CO2 storage by in situ mineral carbonation using a reactive tracer technique

Abstract

In situ mineral carbonation provides the most effective and permanent solution for geologic CO2 storage. Basaltic rocks have the potential to store large volumes of CO2 as (Ca, Mg, Fe) carbonates [1]. Existing monitoring and verification techniques for geologic CO2 storage are insufficient to quantitatively characterize solubility and mineral trapping in a geologic reservoir. We developed and tested a new reactive tracer technique for quantitative monitoring and detection of dissolved and chemically transformed CO2. The technique involves the active tagging of the injected CO2 with low levels of radiocarbon (14C) as a reactive tracer in combination with the injection of non-reactive tracers such as sulfurhexafluoride (SF6) and trifluoromethylsulphur pentafluoride (SF5CF3). The tracer technique has been applied at the CarbFix pilot injection site in Hellisheidi, Iceland as part of a comprehensive geochemical monitoring program during two injection phases; Phase III and IV. SF6 and SF5CF3 confirm the arrival of the injected CO2 and CO2+H2S solutions at the first observation well HN04, which is 125m west of the injection well at 520 m depth. The initial breakthrough of the migrating dissolved CO2 front occurred 63 and 62 days after injection began as evidenced by an initial peak in the SF6, SF5CF3, 14C, and dissolved inorganic carbon (DIC) concentrations. The major increase in the non-reactive tracer concentrations occurred several months after the initial breakthrough, although no major concentration increase has been observed for 14C and DIC suggesting that mineral reactions are dominant during CO2 injection.