The Journal of Physical Chemistry C · 2010 · 39 citations · 42 references
Natural SciencesChemical EngineeringMaterials ScienceMaterials ChemistryPhysical ChemistrySurface ChemistryCoordination ChemistryCoordination PolymersInorganic MaterialsPolymer CharacterizationPorous MaterialsThermogravimetric AnalysisAdsorption IsothermsPorous Adsorbent MaterialsPorous Coordination PolymersPorous PolymersSurface Adsorption IsothermsSurface AreaTextural PropertiesThermal Activation
The effect of activation temperature on the textural properties and low-pressure adsorption performance of the porous coordination polymer Cu 2 (pzdc) 2 (bpy) [pzdc = pyrazine-2,3-dicarboxylate, bpy = 4,4′-bipyridine], better known as CPL-2, was considered to elucidate the material potential for separations. The effective activation temperature range was estimated via coupled thermal gravimetric and Fourier transforms infrared spectroscopy analysis. A textural property analysis via the α s -plot, Dubinin−Radushkevich and Horvath−Kawazoe methods show that a significant reduction in effective surface area and micropore volume occurs when the activation temperature is increased from 373 to 423 K. Cooling of the sample in a moisture-free environment revealed that such reduction is nonreversible, as evidenced by single-component CO 2 equilibrium adsorption tests. Although CO 2 equilibrium adsorption isotherms exhibit a linear behavior in the ambient pressure range, an increase in activation temperature eventually decreases the pore size of the structure resulting in a considerable decrease in loading amounts. This was also corroborated by means of in situ high-temperature X-ray diffraction, which was used to monitor the lattice semiquantitative changes of CPL-2 during the thermal activation sequence. In addition, adsorption uptake data was gathered to estimate a diffusion time constant and elucidate preliminary information about the kinetics involved during the transport of CO 2 through the micropores of CPL-2. After inspection of the adsorbent particle morphology via scanning electron microscopy, it became ostensible that the transport phenomenological model suitable to fit the uptake data was that of a slab-shape particle. For the sample pretreated at 373 K the analysis yields an average diffusion time constant of ca. 0.5 s −1 at 298 K.
42