2012 · 29 citations · 3 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSemiconductor DevicesAnalog InstrumentationAnalog Integrated CircuitsAnalog IntegrationComplementary Metal-oxide-semiconductor TechnologyCurrent-voltage CharacteristicsIntegrated Circuit DesignDirect Wafer BondingElectrical ImpedanceInput ImpedancePull-in VoltageResonant FrequencyResonant Frequency MeasurementSilicon DioxideWafer-to-wafer Bonding
We present long-term measurement results (>1.5 years) of CMUTs, which have been pre-charged for zero external bias operation. The fabrication is based on a direct wafer bonding process with a thick-buried-oxide-layer, which allows the realization of only partially connected, donut-shaped bottom electrodes. The only partially connected bottom electrode has a central portion that is completely encapsulated by 3-μm-thick thermally-grown silicon dioxide, and, thus, electrically floating. The devices are pre-charged by applying a dc voltage higher than the pull-in voltage, which injects charges into the electrically floating portion and creates a sufficiently strong intrinsic electric field in the gap. Measurements of resonant frequency at various bias voltages show that the charges have completely remained in the floating portion for the last 19 months. We prove the zero-external-bias operations with the pre-charged CMUTs by measuring the electrical input impedance, the ac signal displacement, and pitch-catch measurements under zero external dc bias voltage. Our results show that pre-charging CMUTs is feasible, and that the devices are capable of long-term, zero external bias voltage operation.
3
G.G. Yaralioglu, A.S. Ergun, B. Bayram et al. · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2003 · 241 citations · Full text
Engineering, Biomedical Engineering, Finite Element Analysis +13
Zero-bias resonant sensor with an oxide-nitride layer as charge trap
Kwan Kyu Park, Mario Kupnik, Hyunjoo J. Lee et al. · 2010 · 25 citations