Journal of Reinforced Plastics and Composites · 1987 · 93 citations · 6 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsComposite MaterialsFracture ToughnessMaterial PropertiesPolymer CompositesPolymer CrystallinityThermoplastic PolymersCrystallinityCrystallinity DeterminationCrystallinity EffectsElastic ModuliFracture Of PolymersFracture Toughness Of PolymersMode Ii FractureToughened Polymers
Tests were performed to evaluate the effects of crystallinity on the mechanical properties of PEEK 150P polymer and APC-2 graphite/PEEK composite. The tensile strengths, ten sile moduli and fracture toughnesses of the polymer, and the mixed mode I and mode II fracture toughnesses of the composite were measured at crystallinities ranging from 27 to 43 percent by weight. The results show that, in the crystallinity range studied, the tensile properties are not affected significantly by changes in crystallinity, while the fracture toughness depends strongly on the crystallinity. A model is also described which can be used to calculate the crystallinity from the known applied cooling rate. The validity of the model was verified by tests performed with PEEK 150P polymer.
6
Kinetics of non-isothermal crystallization
Taku Ozawa · Polymer · 1971 · 2.3K citations
The morphology of poly(aryl-ether-ether-ketone)
D.J. Blundell, Benjamin Osborn · Polymer · 1983 · 1K citations
Crystallization behaviour of poly(ether-ether-ketone)
Peggy Cebe, Su-Don Hong · Polymer · 1986 · 696 citations
Polymer crystallinity determinations by DSC
Allan P. Gray · Thermochimica Acta · 1970 · 205 citations