18—AN ANALYSIS OF THE AIR-JET YARN-TEXTURING PROCESS PART IV: FLUID FORCES ACTING ON THE FILAMENTS AND THE EFFECTS OF FILAMENT CROSS-SECTIONAL AREA AND SHAPE

Memiş Acar, R. K. Turton, G. R. Wray

Journal of the Textile Institute · 1986 · 24 citations · 1 references

DOIFull text

Open access

Concepts

Abstract

Fluid (drag) forces acting on filaments in an air-flow are theoretically analysed, and equations to calculate them are derived. Drag forces acting on filaments are shown to vary with the filament cross-section, the position of the filaments across the nozzle, and the local air velocity. Since finer filaments have a smaller inertial resistance to fluid forces and have lower stiffness, yarns with finer filaments are shown to be more suitable for air-jet texturing. Theoretical modelling of a filament as it emerges from the nozzle shows that, for filaments with identical linear densities, those with cross-sections having reduced bending and torsional stiffness, such as elliptic cross-sections, may be more suitable for air-jet texturing.

References

1