Influence of Niobium or Molybdenum in Titanium Alloy for Permanent Implant Application

Yuswono Marsumi, Andika Widya Pramono

Advanced materials research · 2014 · 15 citations · 4 references

DOIFull text

Open access

Concepts

Abstract

Titanium (Ti) alloy metal has been used for permanent implant in the human body. Its high strength and hardness take place due to the β phase formation at room temperature. Ti-6%Al-6%V alloy is most popular, of which vanadium (V) content is used as the β phase stabilizer. However V can induce allergic reaction from the body. V can be substituted by other element, such as Mo and Nb. Microstructure observations for Ti-6%Al-6%Mo and Ti-6%Al-6%Nb alloys show that β phase exists as matrix having good workability at room temperature. After preheat at 1000°C, no cracking failure occurs during forging and rolling treatment. Thermal spray method is used for CaPO 4 surface treatment. A CaPO 4 layer on the alloy substrate forms after the molten CaPO 4 is hot sprayed on to the alloy substrate surface. Corrosion test results indicate that the increase in Mo or Nb content up to 6% leads to the increase in corrosion resistance.

References

4