Preliminary study on the use of an inhomogeneous anthropomorphic Fricke gel phantom and 3D magnetic resonance dosimetry for verification of IMRT treatment plans

Abstract

An inhomogeneous anthropomorphic phantom of the human thorax including lungs and spine was developed for verification of three-dimensional (3D) intensity-modulated radiotherapy (IMRT). The phantom and spinal cord were filled with undiluted Fricke gel, whereas the lungs were filled with a special low-density Fricke gel. Based on a computed tomography scan of the phantom, an intensity-modulated stereotactic radiotherapy plan for a bronchial carcinoma was calculated using an inverse planning system (KonRad, DKFZ Heidelberg, Germany). The plan consisted of seven beams delivered in a step and shoot technique out of 67 sub-fields. Immediately after irradiation 3D magnetic resonance (MR) imaging of the phantom was performed using a special pulse sequence for T1 relaxometry. From the MR image data maps of the longitudinal relaxation rate R1 = 1/T1 were calculated. The R1 maps were converted to dose-proportional image data and compared to planning data. Measurement and planning show good agreement in regions of standard Fricke gel with an average deviation below 5%. In regions of the low-density Fricke gel, deviations are higher due to a decreased signal-to-noise ratio in the MR measurement. In these areas also a different sensitivity of the dose response was observed as compared to standard Fricke gel. The inhomogeneous thorax phantom has proven to be a useful pre-clinical tool for 3D methodical verifications.