Fatigue & Fracture of Engineering Materials & Structures · 2000 · 103 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsStructural MaterialsFatigueFracture MechanicsStrength Of MaterialsStrength PropertiesStress AnalysisStress-strain BehaviorAluminium AlloysClosed-cell FoamsFatigue LifeFatigue StrengthFoamsMicromechanical ModelingRatchettingStress
The tension–tension and compression–compression nominal stress versus fatigue life responses of Alulight closed cell aluminium alloy foams have been measured for the compositions Al–1Mg–0.6Si and Al–1Mg–10Si (wt %), and for relative densities in the range 0.1–0.4. The fatigue strength of each foam increases with the relative density and with the mean applied stress, and is greater for the transverse orientation than for the longitudinal orientation. Under both tension–tension and compression–compression loading the dominant cyclic deformation mode appears to be material ratchetting; consequently, the fatigue life is highly sensitive to the magnitude of the applied stress. A micromechanical model is given to predict the dependence of life upon stress level and relative density. Panels containing a central hole were found to be notch insensitive for both tension–tension and compression–compression fatigue loading: the net‐section strength equals the unnotched strength.
10
On the mechanical performance of closed cell Al alloy foams
Y. Sugimura, Jacob L. Meyer, Ming He et al. · Acta Materialia · 1997 · 401 citations
Natural Sciences, Materials Engineering, Materials Science +14
Compression fatigue of a cellular Al alloy
Y. Sugimura, Afsaneh Rabiei, A.G. Evans et al. · Materials Science and Engineering A · 1999 · 149 citations
Natural Sciences, Materials Engineering, Materials Science +14