DSpace (Centre National De La Recherche Scientifique) · 2010 · 10 citations · 0 references
Open access
Natural ResourcesEnvironmental EngineeringWater Resources ManagementUrban HydrologyUrban Water ManagementWater Resources EngineeringRainfall-runoff ModelingRainfall-runoff RelationshipsStormwater Pollution ControlUrban Drainage HydraulicsUrban Drainage SystemsUrban Hydrologic ModelingHydrologic Impact AssessmentHydrologic PerformanceHydrologic Performance AssessmentHydrologic Performance EvaluationSeparate Storm Sewer SystemsUrban Runoff ControlUrban Runoff ModelingUrban Runoff Pollution
A GIS-based BMP tool has been developed within the EU-funded SWITCH project to enable stakeholders to identify appropriate BMPs and their locations to facilitate the control of urban runoff and to reduce the pollutant loads discharged to receiving waters. The attenuation impact of the installed BMPs on separate sewer flows has been predicted by linking this tool to a hydraulic model \n(STORM). The capability of this combined tool is illustrated using a 4.5 ha section of a city centre \ndevelopment site subjected to measured rainfall data for an extreme storm event. Green roofs and porous paving are used as illustrative examples of BMPs and are shown to have the potential to remove 23-26% and 22-28%, respectively of hourly based flows depending in the incident rainfall volumes. When used in combination, these BMPs have the potential to alleviate exceedance flows in \nthe receiving pipe system. The installation of BMPs is also demonstrated to reduce the short term flow \nvariability caused by rainfall fluctuations and hence to enable planners to more accurately design sewer systems with the required capacity.