Journal of Aircraft · 2006 · 36 citations · 8 references
EngineeringAerospace EngineeringMechanical EngineeringAircraft StructuresFinite Element AnalysisStructural EngineeringAerodynamic DesignComposite Aircraft StructuresMetallic Aircraft StructuresWing AerodynamicsWing DesignWing StructuresAerodynamic LoadsAircraft Trim AnalysisInduced DragLift DistributionSteady Aerodynamic LoadsTrim AnalysisTrim Condition AnalysisUnsteady Aerodynamic Loads
An aircraft wing structure is a complex assemblage of interconnected elements composed of both metallic and composite materials. To capture the physics of the structural response at an appropriate level of accuracy the finite element method is employed to model the aircraft structure. The external aerodynamic loads distribution in both the chord and span direction are predicted using the USSAERO paneling method. The Automated StRuctural Optimization System[1] (ASTROS) is used for modeling the structure, the steady aerodynamic loads, and carrying out the trim analysis of a free flying flexible air vehicle. Two wing models are selected for this investigation. The first model, referred to as the Goland Wing[2], has a “beam-rod” structural model. The second model considered is a built-up model typical of a fighter type aircraft[3] and is shown in Figure 7 with the corresponding aerodynamic panel model. Both models have 20 discrete control surfaces along the trailing edge of each aerodynamic model. The aerodynamic effects of gaps between each of the discrete surfaces are ignored to simulate a “so-called” conformal control surface[4]. R.T. Jones[5] has demonstrated that wings having an elliptical spanwise lift distribution ensures minimum induced drag. Therefore, in the present study, the control surfaces are scheduled to obtain an elliptical spanwise load distribution. It is worth noting that the methodology developed in this work is general and can be used to obtain any desired distribution, not just elliptical. In addition, as demonstrated by Munk[7], induced drag is independent of the distribution of lift in the chordwise direction. For the current study induced drag calculations are carried out considering the “Trefftz-plane”[6] downstream from the trailing edge. The wing is held at a trimmed level flight condition using the angle of attack while the control surfaces are used only to obtain the desired elliptical spanwise pressure distribution.
8
The Minimum Induced Drag of Aerofoils
Max M Munk · 1979 · 128 citations · Full text
Engineering, Aerospace Engineering, Mechanical Engineering +17
The Minimum Induced Drag of Airfoils
Max M Munk · Medical Entomology and Zoology · 1921 · 112 citations