SPE Annual Technical Conference and Exhibition · 1998 · 27 citations · 0 references
EngineeringGeologyPetroleum EngineeringInorganic ChemistryReservoir EngineeringReservoir OperationsSalinity ManagementScale ControlHalite DissolutionReservoir Pressure DeclineReservoir ScalingSalinity EffectsScale InhibitionScale Inhibitor ChemistryScaling In Oilfield Production SystemsSolubility
Abstract With the development of a number of new HT/HP fields in the North Sea, for example the ETAP fields (Eastern Trough Area Project), a number of important "scale" control issues have arisen. In addition to harsh downhole conditions (T - 180 C; P - 13,000 psi), high salinity formation water chemistries indicate that the control of inorganic precipitates in these systems will be very important. The form of the inorganic precipitates are predicted to include the more Cornnjton oilfield scales (BaSO4 and CaCO3). In addition the very high salinity of several of the formation brines (TDS - 350,000 ppm) can result in halite precipitation (NaCl(s)). This occurs either as a result of water flash-off into the gas phase as pressure decreases during production or simply due to reduced halite solubility as temperature and pressure decline during production. This paper discusses the potential scaling problem associated with these harsh reservoir conditions and outlines various solutions for treating such reservoirs using conventional scale inhibitor technology. A series of different generic scale inhibitor chemistries have been assessed for their potential application in such reservoirs. The assessment has involved a range of laboratory procedures including thermal stability, brine compatibility, carbonate and sulphate inhibition efficiency testing. These tests were conducted at temperatures up to 180C. The laboratory screening procedures led to the selection of the most appropriate generic chemical types which are applicable for scale inhibitor treatment under HP/HT reservoir conditions. Further studies then examined the most appropriate species for application downhole as squeeze treatment chemicals under HP/HT conditions. This included static adsorption tests conducted at temperatures and pressures ranging from 950C at saturated vapour pressure (SVP) to 180C and 7,500 psi. Reservoir conditioned core flooding studies were conducted on the two most appropriate species in order to assess formation damage issues and to derive their respective adsorption isotherms in order to model potential squeeze lifetimes. P. 645