MODELING MECHANICAL CELL DAMAGE IN THE BIOPRINTING PROCESS EMPLOYING A CONICAL NEEDLE

Minggan Li, Janusz A. Koziński, Dae Kun Hwang

Journal of Mechanics in Medicine and Biology · 2015 · 46 citations · 23 references

Concepts

Abstract

Biofabrication technologies involve the incorporation of living cells into various bioproducts by employing different cell manipulation techniques. Among them, bioprinting, delivering cell suspension through a fine needle under pressurized air, has been widely used because of its capability of precise process control. In the cell-printing process of bioprinting, cells are exposed to fluid stresses due to the velocity gradient in the fine needle. If the stresses exceed a certain level, the cell membrane may be overstretched, leading to membrane failure and thus causing mechanical cell damage. Modeling the mechanical cell damage in the bioprinting process is a challenging task due to the complex fluid flow and cell deformation involved. This paper introduces a novel method based on computational fluid dynamics (CFD) to represent the mechanical cell damage in the bioprinting process using a conical needle. Specifically, the cell deformation and movement during the cell-fluid interaction processes were represented by the immersed boundary method (IBM). A strain energy density (SED)-based cell damage criterion was developed and used to determine cell damage. Experiments were performed by using 3T3 fibroblasts and the results agree well with the proposed model.

References

23