Processing, Microstructure and Properties of Laminated Ni-Intermetallic Composites Synthesised Using Ni Sheets and Al Foils

M. Konieczny, R. Mola, P. Thomas, M. Kopciał

Archives of Metallurgy and Materials · 2011 · 26 citations · 18 references

DOIFull text

Open access

Concepts

Abstract

Processing, Microstructure and Properties of Laminated Ni-Intermetallic Composites Synthesised Using Ni Sheets and Al Foils The laminated Ni-(NiAl 3 +Ni 2 Al 3 ) and Ni-Ni 2 Al 3 intermetallic composites were fabricated by reaction synthesis in vacuum using Ni sheets and Al foils. The aluminium layers were completely consumed due to the formation of intermetallic phases. The Ni-Al reaction at 620°C was studied by interrupting in steps the reaction process to observe the microstructural changes. The final microstructure consisted of alternating layers of intermetallic phases and unreacted nickel can be designed easily because the stable structures of the composites depend only on the treating time. Microstructural examinations using scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray microprobe analysis (EDX) demonstrated that after 1h of treatment Ni 2 Al 3 is the predominant intermetallic phase. The formation of the Ni 2 Al 3 phase is thermodynamically favoured over the formation of the other phases and can be understood from the steps occurred through a series of solid state reactions. The tensile strength of the laminated composites increases with an increase of the volume fraction of the intermetallic products. However, it decreases after long heat treatment because the Ni 2 Al 3 /Ni 2 Al 3 interfaces can very easily delaminate due to a very weak bonding caused by continuous Al 2 O 3 inclusions. Observations show that the laminated composites exhibit a mixture of brittle fracture of intermetallics and ductile one of residual Ni layers.

References

18