Experimental Studies of the Effect of Rough Surfaces and Air Speed on Aerosol Deposition in a Test Chamber

Alvin C.K. Lai, Miriam Byrne, Antony J. H. Goddard

Aerosol Science and Technology · 2002 · 58 citations · 22 references

Concepts

Abstract

Understanding the fate of particles indoors is important for human health assessment because deposited particles, unless re-suspended, cannot be inhaled. To complement studies in real build-ings, where control of variables is often dif cult, an experimen-tal test chamber facility (8 m3) was designed to study particle depositionunderwell-stirred conditions usingmonodisperse tracer aerosol particles in the range of 0.7 to 5.4 m. The use of neutron-activatable tracers facilitated simultaneous surface sampling and aerosol concentration decay measurements. Aerosol deposition on both smooth surfaces and regular arrays of three-dimensional roughness elements under 3 different air ow speedswas investigated in the test chamber. Itwas expected that the texture of the chamber surface would signi cantly in uence par-ticle deposition, but some counterintuitive results were observed: under the lowest air ow condition and for the smallest particle size, particle deposition onto rough samples was found to be less than on the corresponding smooth surfaces. The ratio of particle deposition on rough surfaces relative to smooth surfaces increased with particle size and magnitude of air- ow. For the largest particle size and air ow speed, particle depo-sition on the rough surfaces exceeded that on the smooth surfaces by a factor of 3.

References

22